Dade Mprɛte a Wɔde Yɛ Adwuma

Dadeɛ mprɛte yɛ dadeɛ a wɔabobɔw a ɛyɛ tratraa-a ne kɛseɛ boro mm 4, a wɔde di dwuma wɔ adansiɛ, hyɛn a wɔyɛ, nhyɛsoɔ anwenneɛ, nsuo afiri, ne mfiridwuma mu. Ɛgyina nneɛma no su so-carbon steel, stainless steel, anaa alloy steel-dade mprɛte de ahoɔden, ahoɔden, ne formability a ɛho hia ma mmeae a ɛyɛ den ma. Nsonsonoe a ɛtaa ba ne carbon dade krataa, dade a ɛnyɛ den mprɛte, hyɛn mprɛte (ma po so propulsion & hulls), pipeline dade mprɛte, ne wear-resistant brand mprɛte te sɛ Hardox 500.

• Carbon Steel Krataa / Mprɛte: Dade a wɔtaa yɛ a wɔde afrafrade a ɛba fam anaasɛ ɛyɛ mmerɛw; mprɛte a ɛyɛ den 5–200 mm+
• Dade a Ɛnyɛ Den a Wɔde Yɛ Mprɛte: Mpɛn pii no, 304, 316, 316L, duplex, ne nea ɛkeka ho; surface finish options (pickled, #4, BA, ne nea ɛkeka ho) .
• Hyɛn Mprɛte: AH36/DH36/EH36-ahoɔden a ɛkorɔn a ɛma aba a ɛyɛ den wɔ ɔhyew a ɛba fam mu ma po so nkɛntɛnso & ɔbrɛ
• Hyɛ Mprɛte: Hardox 500 etc.-high hardness ( Kɛse sen anaasɛ ɛyɛ pɛ 500 HBW) ne impact toughness ma wear & abrasion
• Mprɛte a Wɔakata so / Wɔayɛ no Aduru: Galvanized dade mprɛte (zinc a wɔde akata so), pre-painted, twa & edged mprɛte

• Melting & Casting a Wɔde Tow Nneɛma– Dadeɛ a wɔyɛ denam EAF anaa BOS so; kɔ so tow gu abopon mu.
• Hot Rolling a Ɛyɛ Ɔhyew– Slabs heated to ~1,100-1,300℃, rough na wie rolled to mprɛte thickness.
• Normalizing, Ɛdum & Tempering– Titiriw ma hyɛn mprɛte ne wear mprɛte na ama wɔanya ahoɔden ne toughness.
• Awɔw mu Rolling / Mprɛte a Wɔyɛ no Flattening– Na awɔw rolled anaa plate stock a ɛhwehwɛ tighter flatness ne soro wie.
• Ayaresa a Wɔde Yɛ Nneɛma a Ɛwɔ Anim– Pickling, galvanizing, polishing, tuo a wɔde bɔ tuo.
• Twitwa / Edge / Ntwitwiridii– Amanne akɛse: cuttings, nested mprɛte, ano ahosiesie.
• Nhwehwɛmu & Sɔhwɛ:

1. Mfiridwuma mu sɔhwɛ ahorow: tensile, aba, elongation, impact (Charpy V-notch) .
2. Hardness sɔhwɛ ma wear mprɛte
3. Ultrasonic thickness / sintɔ nhwehwɛmu
4. Nnuru a ɛwɔ mu no ho adansedi
5. Dimensional tolerances (afã a ɛyɛ tratraa, ne kɛse yɛ pɛ) .

• Yield & Tensile Ahoɔden: Hyɛn mprɛte te sɛ AH36/DH36 wɔ aba a ɛba fam koraa a ɛkorɔn ( Kɛse sen anaasɛ ɛyɛ pɛ 355 MPa) ne tensile ahoɔden pa ma po mu nhyehyɛe adesoa.
• Toughness wɔ Ɔhyew a Ɛba Fam: Wɔayɛ EH36 ama wim tebea a awɔw wom; nkɛntɛnso adwumayɛ no ho hia yiye.
• Abrasion a Wɔko tia: Mprɛte a wɔhyɛ (sɛ nhwɛso no, Hardox 500) de denden a ɛkorɔn ne nea ɛyɛ den bom ma ɛko tia mpaapaemu wɔ nkɛntɛnso kɛse ase.
• Nneɛma a Ɛko Tia Nsɛeɛ: Dade a ɛnyɛ den mprɛte ne dade mprɛte a wɔde galvanized ayɛ bɔ ho ban fi nkannare ho; nsu afiri ne nneɛma a wɔkora so hwehwɛ dade a ɛko tia.
• Formability / Weldability a wotumi yɛ: Carbon dade mprɛte (A36) a ɛnyɛ den sɛ wɔbɛweld na wɔayɛ; hyɛn mprɛte wɔ ahwehwɛde pɔtee bi ma welding, bending ne nea ɛkeka ho.

• Po so Ahyɛn a Wɔyɛ & Po so Adwuma: Hulls, decks, bulkheads, mpoano rig platforms a wɔde AH36 / EH36 / DH36 di dwuma.
• Nhyɛso Nkuku & Boilers: ASTM A516 mprɛte a ɛwɔ grades a ɛfata a wɔde bedi dwuma wɔ baabi a emu nhyɛso ne ɔhyew ho hia.
• Dade a Wɔde Yɛ Nneɛma a Wɔde Yɛ Nneɛma: Adansi, bridges, frames-ASTM A36 mprɛte a wɔde di dwuma kɛse.
• Wear Parts / Mining / Mfiri a emu yɛ duru: Hardox 500 ne mprɛte a ɛtete saa a ɛwɔ loaders, dump trucks, chutes, liners mu.
• Pipeline & Ngo & Gas a Wɔde Yɛ Nneɛma: Pipeline dade mprɛte ma pipeline afã akɛse a ne kɛse yɛ, ɛtɔ mmere bi a wɔde nneɛma a wɔde kata so, a wɔde di dwuma wɔ compressor stations anaasɛ trenchless crossings.
• Decorative / Nneɛma a Wɔde Sisi Nneɛma: Stainless steel mprɛte, brush anaa polished, ma cladding, facades.

• Ahoɔden a Ɛkorɔn ne Nea Ɛyɛ Den: Po so-grade ne pressure-ahyɛn mprɛte di adesoa a emu yɛ den ne nneɛma a atwa yɛn ho ahyia a emu yɛ den ho dwuma.
• Sɛnea ɛtra hɔ kyɛ: Wear mprɛte trɛw component nkwa nna mu wɔ abrasion ase; mprɛte a wɔde galvanized ayɛ no ntumi nsɛe.
• Versatility wɔ Size & Thickness mu: From thin sheets (cold-rolled) to very thick plates (>200 mm) ma structural a emu yɛ duru anaasɛ wear applications.
• Weldability ne Nneɛma a Wɔyɛ: Grades pii a wɔayɛ ama weld, bend, ne cut adwumayɛ pa.
• Nneɛma a wɔyɛ no sɛnea wɔpɛ: Ntwitwa, pre-twitwa shapes, edge prep, coating anaa galvanizing a ɛwɔ hɔ wɔ specification biara mu.

Sɛ worekyerɛ dade mprɛte a, susuw ho:

• Dade a wɔde yɛ nneɛma + gyinapɛn (sɛ nhwɛso no, AH36, A36, A516) .
• Thickness, ne tɛtrɛtɛ, ne tenten, flatness tolerance
• Surface wie & ayaresa (galvanized, stainless polish, hyɛ mprɛte, ne nea ɛkeka ho)
• Edge type (wɔatwitwa, ogyaframa a wɔatwa, mill ano) .
• Sɔhwɛ a ɛho hia (mfiri, nkɛntɛnso, denden, UT) .
• Dodow ne nhyehyɛe a wɔde bɛkɔ

• Dade a Wɔde Yɛ Nneɛma: ASTM A36, A516, AH36 / DH36 / EH36, Hardox 500, a wɔde yɛ nneɛma a ɛnyɛ den
• Gyinapɛn ahorow: ASTM A36, ASTM A516, ASTM A131, EN / ISO a ɛne no sɛ
• Thickness Range a Ɛyɛ Fɛ: ~4 mm kɔ Kɛseɛ sene anaasɛ ɛyɛ pɛ 200 mm gyina ne su so
• Nkrataa ahorow: Ɔhyew a wɔabobɔw, awɔw mu a wɔabobɔw, galvanized, wear mprɛte, hyɛn mprɛte
• Nnwuma a Wɔde Di Dwuma: Po so, nhyɛso nkuku, nhyehyɛe, asɛe afã horow, pipeline dade mprɛte

Adansedi nkrataa

 

CE Adansedi Krataa

ISO 9001 Adansedi krataa

API Q1 Adansedi krataa

ABS Adansedi krataa

AP-5L Adansedi krataa

API-5CT Adansedi krataa

 

Tags a ɛyɛ hyew .: dade mprɛte, China dade mprɛte manufacturers, suppliers, adwumayɛbea